The purpose of this article is to provide a detailed overview of the top 10 solar loaders and to highlight the benefits of each product.
If you are considering the purchase of a solar charge controller, you have come to the right place.
The advantages of each product are clearly explained, so you know which product best meets your needs.
1. X-RAYS STRAY CHECK
Xenogs are best used for solar off-grid telecommunications applications.
It integrates the PWM charging system, which increases battery life and therefore system performance.
The controller is supplied with an electronic safety device that protects it from damage that may occur as a result of installation errors.
A striking feature of these charge controllers is their optimised capacity of 30 A, suitable for a system voltage of 12 V DC.
It also comes with sealed, flooded deep cycle batteries.
It goes through four stages of charging: Bulk, booster float and leveling.
It has an automatic system to extend battery life through remote temperature compensation. This method offers optimum protection against overloading, short circuits and reverse polarity.
The roamer uses pulse width modulation (PWM).
It controls the panel’s power consumption and uses it to charge the battery efficiently.
Renogy has a temperature sensor that regulates the temperature according to the regulations. It can generate a voltage of up to 40 watts.
This solar load controller also uses the negative shredding, the internal shredding that occurs when the load is positive, which is the most traditional shredding method.
Renogy offers a four-step recharge in PWM mode.
They’re bulk, the float booster and the leveling.
It is also a self-regulation to prevent the battery from charging or discharging.
As with most charge regulators, this is a self-test to prevent damage due to installation errors.
It is equipped with a remote temperature sensor to monitor the battery temperature.
Numerous LED indicators monitor the charge status and battery information.
It has improved the technology compared to other charge controllers.
This is an RS232 port and the lithium battery charging mode.
RS232 enables remote sensing with the BT-1 Bluetooth module.
You can connect the Renogy BT smartphone application to monitor them.
The lithium battery charging mode allows you to charge most 12V lithium batteries.
Renogy is optimized for 12V or 24V systems.
The product has a rating of 4.8/5 on amazon values.
It’ll take a couple of weeks to improve? Like most products, of course they can.
Examples : Different LED colors. LCD backlight (with a kind of 5-second waiting time)
Instead of displaying only the temperature in degrees Celsius, you can use the Fahrenheit reading option.
But apart from that, it’s a great product! Excellent product, even for a beginner.
Plus and benefits:
– To install this charge controller, it must be connected to a 12/24 V battery.
The light comes on when the battery is connected.
– Renogy’s efficiency is low, so it can take several days to fully charge the deep cycle battery.
– The charge controller is not waterproof and can therefore be damaged by water.
It should therefore be stored in a shady and cool atmosphere.
2. EPEVER LAST MPPT 30A SOLAR CHARGE CONTROLLER 12V,2
The EPEver solar charger can work in the same way as Renogy Wanderer with 10A, 20A, 30 or 40A with negative ground. It can also use the maximum voltage at the PV input.
It has different operating modes and optimal battery types, which can be alternated with a shape.
The EPEver MPPT solar charging controller uses an automatic voltage detection system that can store previous settings via the automatic memory functions.
Other monitoring functions of this solar charging controller include four-step battery charging, an LCD display to indicate charge status, a remote meter to support functions, and temperature compensation.
It is relatively cheap and is delivered with great care.
The EPEver controllers are virtually unrivalled in terms of battery protection and control.
Four-stage charging provides maximum battery protection, making it economical enough to save you money.
The brand offers models ranging from 20A to 4, although the 30A model would simply be moderate for average incomes.
The EPEver charge regulator uses sealed, flooded or helium-lithium batteries.
It can convert large amounts of DC voltage from 12V to 60V for storage in rechargeable batteries.
It offers excellent value for money because it regulates the temperature and also compensates for voltage fluctuations.
Plus and benefits:
– Compared to other charge controllers, it does not provide a high input voltage and output current.
– The MPPT function is activated only when a power of about 10 W is received.
– It works ONLY with a battery voltage between 12-24V and a maximum solar power supply of 46 to 92 Volt. Buy Amazon
3. X-RAY ADVENTURE SEEKER
Renogy Adventurer is another super efficient charge controller with unique Bluetooth functionality.
It is connected to a Bluetooth monitor, so you can check your system statistics via your phone with the Renogy Bluetooth application and get a little more insight into your system and device.
The LED indicates the battery voltage and temperature (25°) and also has a USB port to charge your mobile phone.
The rear panel has four terminals, Bluetooth ports for the battery temperature sensor and the battery voltage sensor.
The Adventure Tramp now has a lithium version for charging the lithium batteries.
It has a very aesthetic design, negative grounding, a recessed regulator and can be mounted on the walls of a motorhome or caravan.
It is clear that not everyone likes a structure. The Renogy Adventure Finder has a surface-mounted trailer which offers a second option.
Thanks to its optimal charging capacity, it can charge 12 and 24 V photovoltaic systems. Like other solar charging controllers, it integrates PWM charging.
It is fully equipped with a self-diagnosis system and electronic functions that protect it from damage during installation.
Main features : Front USB port. Its built-in function distinguishes it from other charge controllers.
It also has a BT-1 Bluetooth module that allows you to use it with your application smartphone and control it on your screen.
It also has a 4-stage charging system (bulk, boost, float and levelling).
This ensures that the loading and unloading processes are not reloaded.
There is no other way to get a universal charge controller.
Plus and benefits:
– The advantage over others is that it can charge almost all types of lithium batteries available on the market.
Enables power consumption up to 10A.
– Renogy Adventurer has a charge control system that extends from the panels to the battery, protecting battery life and durability.
– Renogy Adventurer is compatible with a wide range of lithium batteries – sealed, gel, flooded and lithium batteries. Buy
4. VITRON SMARTSOLAR MPPT-SOLAR CONTROLLER
Not all charge controllers make it possible to connect an entire group of solar panels to a single monitoring system.
The Victron charge controller makes this possible.
Victron’s solar-powered Bluetooth controller is fast and expensive, but useful because, like Renogy Adventurer, it has built-in Bluetooth.
The flexibility it offers you is simply amazing.
This allows multiple devices to be connected to the charge controller.
Thanks to the integrated Bluetooth function, you can control the operation of your smartphone.
Sounds great, doesn’t it?
In addition, you can charge the battery pack in float mode, which allows for a minimal charging system.
The Smartphone Monitor App allows you to check the voltage flowing through your smartphone, the current it generates and the status of the battery monitors.
If nothing powerful is done about it, the batteries do not need to be recharged.
The charge controller has three different states: floating, volumetric and absorbent.
The float is where your batteries are fully charged to keep them full and healthy.
The bulk charging mode allows the battery to be heavily charged after it has been discharged through excessive use.
The solar application has a history display column that shows the actions in the panel.
The History column shows the various cycles through which the charge has passed.
It has a built-in algorithm for lithium batteries.
This means that it can even withstand a current of 40 V.
You can customize and use it in a 16 mesh configuration and Victron can hold it.
It can also be easily operated with the smartphone application, which is very sensitive and intuitive.
The application is connected to it via Bluetooth.
The Victron charge controller works with 99% efficiency.
The Victron Solar charge controller is an intelligent charging output that protects your solar panel from damage.
Plus and benefits:
– It has the widest operating range for charging the voltage of all charging regulators.
– Four solar panels can be connected in series with this charge controller.
– It has a very effective remote monitoring and control system – the Victronic connections.
The Bluetooth control function can work even when there is no Internet connection.
This can be done by connecting to the LoRaWAN (wide area network) device.
5. ALL FORCES 20A SOLAR CONTROLLER BLUE
If you are looking for a highly portable solar charge controller, the All-Power Solar Charge Controller is simply the best option.
It is a 20 A PWM charge controller.
It’s better to keep it in the shade than in the full sun.
It is equipped with an automatic solar panel and a battery monitoring system – if the battery voltage drops below 8V, it switches off automatically.
It should therefore be kept in a cool, well-ventilated place.
It has an integrated short-circuit protection (protection against short circuits and cable breakage).
It is relatively easy to use and is suitable for small solar energy systems.
The All Power Solar charge controller uses a voltage of 12/24DC and a current consumption of 10mA at a rated load current of 20A.
It has an increased floating load of 13.7 V/27.4 V.
USB 5V/3A output and the normal size of this charge controller is 150*75*35mm x 5.9*3*4 inches.
The all-current charge controller is sold at amazon for $23, a relatively low price compared to other charge controllers.
It’s very accessible.
Plus and benefits:
– It does not work with lithium ion or other batteries.
– As already mentioned, it is only intended for indoor use as it can only be used within a certain temperature range (usually -35°C to 60°C).
– This charge regulator is only suitable for lead-acid batteries – OPEN, AGM and GEL. Buy Amazon
6. X-RAY TUBE LOADING CONTROLLER
The Rover charge controller is available in 20M, 30M and 40M versions.
The 20M version can select 12-watt systems, the 30M can support 400-watt/12-watt systems and the 40M can support 800-watt/24-watt systems.
The first step required to configure this charge controller is installation in a 12V battery.
It has an aluminum casing that effectively dissipates heat while protecting against wear and tear.
It’s also a self-diagnosis.
It can easily detect system errors for quick troubleshooting.
Usually this involves the display of error codes.
It can work with different types of batteries, both gel and lithium.
Battery types can be added to the main menu on the front screen.
The battery is sealed as standard.
The charge controller comes with a remote control sensor and a USB communication cable.
This is required for remote sensing with the optional PC software.
This software allows users to configure royalties and other settings.
You can download it from Renogy’s website.
Renogy is compatible with the BT-1 Bluetooth module, which can be connected to a PC or mobile phone via an RS232 port.
This makes remote control possible.
The rover is an MPPT charge controller that can be used to charge 24V.
The first two connectors on the rear panel are for the charge controller, while the middle two are for the battery compartment and the last two are for an optional DC load.
Built-in error codes help diagnose and correct system errors.
Plus and benefits:
– It is an intelligent controller that can monitor with 99% efficiency.
– The rover is equipped with overload, overload and short-circuit protection and a programmable load function.
– The LCD display allows you to navigate through the screen and program the charge controller as desired.
7. RESULT WITHDRAWAL 40V/150V PV input
It is available in 10A,20A,30A and 40A versions.
This solar charging controller also uses MPPT – Maximum PowerPoint Tracking Technology (MPPT). Use a negative soil and a large, better well.
The charge controller is designed for off-line charging and discharging of the battery.
The intelligent tracking algorithm function maximizes the energy generated by the photovoltaic modules.
The solar epic uses an MPPT-type charge controller to optimize battery life and protect its proximity.
In addition, it can independently diagnose and prevent any damage.
It measures 119*2.5*7.2 inches and weighs 8 pounds for shipping.
Solar Epic uses Advance MPOT to optimize the functions of the solar system.
Like other large solar charging regulators, it realizes a 4 charger variant (dense, frost, flooded and user defined)
It has a rating of 4.8 out of 5 on the Amazon user rating.
Most of the reviews collected focused on the MPPT’s exceptional SuperEpic labeling capabilities.
One user said he used several charging controllers that never fully charged his battery.
However, thanks to this solar controller it was able to fully charge its 450 ampere hour battery in 24 hours.
He also stated that the SolarEpic MPPT charge controller can meet the energy needs of his devices, a 42-inch television and a 23-cubic meter freezer.
Plus and benefits:
– Solar Epic has excellent heat dissipation thanks to its cast aluminium housing.
It is also equipped with a controller for free cooling.
– It is limited to a maximum input voltage of 150 V.
– As soon as the voltage reaches a low level, the switch-off function prevents the battery from being discharged.
9. Y-SOLAR 80A SOLAR CHARGE CONTROLLER
The Y-Solar 80A solar charging controller is a compact, energy efficient and battery optimised controller that meets budget requirements.
The rated current is one of the highest (80A) and it can work with 12V/24V batteries.
The LCD screens have been simplified in such a way that every hobbyist can understand the terms.
This regulator is made of a heat sink and corrosion resistant aluminium and comes with a 2 year factory warranty.
This charge controller ensures smooth and quiet operation of your solar energy system.
It changes completely in 24 hours and causes unwanted headaches for the user when the battery is low.
Y-Solar integrates into the general house charger.
Moreover, it is cheap and affordable, even for middle-income households, and costs only $62 in the Amazon.
It comes with an output of 80A/60A.
The Y-Solar charge controller has several connections – solar panel, battery compartment and load.
If you are looking for a charge controller with an intelligent charge mode, Y-Sokar is one of the best.
It can also detect the battery level.
It also has a connector that connects to the monitor for remote monitoring.
It switches off automatically as soon as the voltage is low, stopping the low voltage.
The charge controller is self-cooling with the fins at the rear.
This is simply best for newcomers to solar technology.
The reason for this is that it is easy to use and is equipped with LEDs and control buttons that make it more comfortable.
This means that if there is no manual, it can easily be used by following the instructions on the LCD screen.
An overview?
They’re the best you can find. In the Amazon it was rated at 7.8.10.
Recommended for all types of users.
Plus and benefits:
– It has a highly efficient temperature control system that protects the battery from short circuits, reverse polarity, overload and overheating.
– Unlike other dedicated charge controllers, Y-Solar 80A uses PWM and MPPT charge modes – it has more edges than other controllers.
This dual charging mode gives you exactly the setting you need.
– The Battery Charge Controller has a way to reverse the .
10. SOLAR CHARGE CONTROLLER
This product is another good choice when it comes to solar controllers.
The LCD screen is clearer, more pleasant and more modern.
The device is fully automated.
It has an output switch, intelligent control and is very easy to use.
PWM&WPC mode is a simple way to dramatically improve system efficiency and extend battery life.
The GHB 20A 12V 24V is supplied with the following protection functions : Storm protection, overload protection, undervoltage protection, overload and short circuit protection, reverse polarity protection.
It also has the following technical characteristics: USB output voltage: 5V; rated discharge current: 2 DC output voltages : 12 V; total USB output current : 3A.
It has excellent protection function, output switch, intelligent control.
Plus and benefits:
– It is easy to install and works well.
– It is easy to connect to the wires and easy to install.
– The temperature display can only be read in Celsius. Buy
Final reflection
Simplify your life by choosing the best solar power controller.
Make a list of the functions you like on the controller and then select what you like.
best mppt charge controller 2019,powmr mppt review
Disclosure: We are a professional review company & our reviews are not biased towards any of the products we review. We test each product thoroughly and give marks to only the very best that is given by our author. We are very independently owned & the opinions expressed here are our own. However, if you purchase anything after clicking the links present in the articles then we get some commissions for it which help maintaining the websites expenses like servers, security etc.